Find parts for your ride

CRF300L 2021-2026 Fork Spring Install Guide | Race Tech Fork Kit

CRF300L / CRF300L Rally Race Tech Fork Spring Install & Setup Guide (2021-2026)

Upgrading your Honda CRF300L or CRF300L Rally with a Race Tech fork spring kit is one of the most effective ways to improve front-end performance. This kit corrects the overly soft stock suspension, improves braking stability, and delivers better control on and off-road.

πŸ”₯ Featured Product

Race Tech Hi-Performance Fork Spring Kit

Designed specifically for the CRF250L and CRF300L platform, this kit adds a second spring to the damping leg, dramatically improving overall spring rate and front-end performance.

πŸ‘‰ Shop Race Tech Fork Spring Kit

βœ… Fits

  • Honda CRF250L
  • Honda CRF250L Rally
  • Honda CRF300L (2021-2026)
  • Honda CRF300L Rally (2021-2026)

πŸ’‘ How This Kit Works (Important)

The CRF300L uses a split-function fork design:

  • Left fork leg: Damping only
  • Right fork leg: Spring only

The stock setup is significantly under-sprung. The Race Tech kit adds a spring to the damping leg, increasing total fork spring rate and improving balance. :contentReference[oaicite:1]{index=1}

πŸ“¦ What’s Included

  • 1 Fork Spring
  • Spring Spacer Tube
  • Upper & Lower Spring Collars
  • Preload Washers

⚠️ Before You Start

  • This install requires basic suspension service knowledge.
  • Fork oil must be measured by volume, not height.
  • Work on a clean surface to avoid contamination.

πŸ”§ Installation Overview

Step 1: Remove Forks

Remove the forks from the motorcycle following Honda service manual procedures.

Step 2: Open Fork Caps

Carefully remove the fork caps and springs from both fork legs.

Step 3: Install New Spring in Damping Leg

Install the Race Tech spring into the damping-only fork leg using the supplied collars and spacer.

Step 4: Reinstall Stock Spring

Reinstall the stock spring in the spring leg as normal.

Step 5: Set Oil Volume

Refill fork oil to the correct volume as specified by Race Tech.

Step 6: Reassemble Forks

Reinstall fork caps and reinstall forks onto the bike.

Step 7: Test Ride

Start with a slow test ride and evaluate braking and front-end feel.

βš™οΈ Setup Tips

  • Choose spring rate based on rider weight
  • Heavier riders = stiffer spring
  • Pair with upgraded rear shock for best balance

πŸ”₯ Why This Upgrade is Critical for CRF300L

  • Stock forks are extremely soft
  • Reduces front-end dive under braking
  • Improves stability in sand and rocks
  • Balances bike when upgrading rear shock

Upgrade Your Full Suspension Setup

For best performance, pair your fork upgrade with a rear shock:

πŸ‘‰ Shop CRF300L Rear Shocks