Find parts for your ride

CRF's Only Project Bike

2026 Honda CRF450R Build & Prep

Follow along as we build and prep our 2026 Honda CRF450R. From the starting point to the first shakedown and beyond, we'll share the parts, setup decisions, shop photos and ride notes as this project takes shape.

Race prep is complete, and the ECU programming results are in. See the chassis service, our custom Mode 2 and Mode 3 maps, and how the bike responded on the follow-up ride.

Update 01 • The Starting Point

Meet the 2026 CRF450R

Brand new off the dealership floor. Zero hours. All stock. We started with race prep and chassis service, then moved on to ECU programming after our first ride revealed excessive flameouts and stalling.

Stock 2026 Honda CRF450R on a stand in the workshop before the CRF's Only project build
Our starting point: the stock 2026 Honda CRF450R, ready for the Tokyomods / CRF's Only build and prep.

Build at a Glance

  • Bike: 2026 Honda CRF450R.
  • Starting condition: Brand new; 0 hours; all stock.
  • Chassis: Race prep and bearing service completed.
  • ECU: Stock Honda ECU with custom programming in Modes 2 and 3.
  • Ride testing: First ride and follow-up ride completed.
  • Latest result: Flameouts and stalling resolved on the follow-up ride.
  • Last updated: .

We'll keep adding photos, confirmed parts selections, setup details and ride feedback as the project develops.

Update 02 • Race Prep & Chassis Service

New Bike? Check the Bearings. Grease the Chassis.

Before the performance changes, we took care of the foundation. Our brand-new CRF450R came apart for chassis inspection, and the bearing areas we inspected were virtually dry.

Race prep meant opening up the steering head, swingarm pivot and suspension linkage, inspecting the bearing areas and properly greasing the serviceable bearings. We also opened up the rear axle and adjuster area during the work.

Our shop takeaway: don't assume a new bike is properly greased.

Make chassis inspection and lubrication part of your new-bike preparation. Check it, grease it and establish a solid starting point before the first ride.

CRF450R swingarm pivot needle bearing exposed with the bearing collar removed
Inside the swingarm pivot With the collar removed, the needle bearing is accessible for inspection and greasing.
Grease on the exposed steering-stem tapered roller bearing during CRF450R chassis service
Steering-stem bearing service A close look at the exposed bearing and grease during chassis prep.

Race Prep Notes

  • What changed: Chassis bearing inspection and lubrication before the first ride.
  • Why we did it: The bearing areas we inspected on this new bike were virtually dry.
  • Areas covered: Steering head, swingarm pivot and suspension linkage, with the rear axle and adjuster area also opened up.
  • Shop advice: Include race prep and chassis greasing when preparing a new bike.

More from the Chassis Prep

Next in the build: ECU programming and the difference on our next ride .

Update 03 • ECU Programming

From Flameouts to Smooth, Connected Power

Our first ride made the next priority clear: address the excessive flameouts and stalling. We kept the stock Honda ECU, reprogrammed Modes 2 and 3, and headed back out for another ride.

Gloved hands accessing the stock ECU and wiring connectors beside the airbox on the 2026 Honda CRF450R
Working with the original Honda ECU. This stage changes the programming while retaining the stock unit.

First Ride: Too Much Stalling

The initial ride brought repeated flameouts and stalling that interrupted the flow of riding. We wanted a more dependable response at the throttle and a better connection between rider input and the power reaching the ground.

Stock ECU, Two Custom Maps

The original ECU stayed with the bike. We reprogrammed Modes 2 and 3 to give this CRF450R two distinct power characters: a torque-focused map and a smooth, linear map.

The difference on our follow-up ride was clear.

The flameouts and stalling were completely gone on that ride. Throttle response improved, the bike felt more connected to our inputs, and power felt stronger through the bottom, midrange and top end.

Mode 2 & Mode 3: Two Ways to Deliver the Power

These descriptions refer to the custom programming in our project bike's ECU.

Custom Mode 2

Torque Power Map

Mode 2 gives the bike a strong, torque-focused character. It delivers the pronounced feeling of pull we wanted, together with the improved throttle response we felt after programming.

Custom Mode 3

Linear Power Map

Mode 3 delivers a smooth, consistent build of power through the RPM range. On our follow-up ride, the pull felt improved and predictable from the bottom through the midrange and into the top end.

Ride Notes: Before & After Programming

  • Before: Excessive flameouts and stalling on our first ride.
  • What changed: Custom programming of Modes 2 and 3 in the stock Honda ECU.
  • After: No flameouts or stalling on the follow-up ride.
  • Throttle feel: Improved response and a more connected, predictable delivery.
  • Power: Stronger-feeling bottom, midrange and top end.
  • Map choices: Mode 2 for a torque-focused character; Mode 3 for smooth, linear delivery.

These are our rider impressions from the follow-up ride. We'll continue adding setup details and ride notes as the project progresses.

Explore ECU Programming for Your CRF

This update shows what programming changed on our project bike. Visit our service page for ECU-programming details and options for your model and setup.

Keep Following Along

One Bike. Every Step of the Build.

Bookmark this page for new photos, parts, setup changes and ride notes as our 2026 CRF450R comes together.

Explore the CRF450R Rider Guide