Description
CRF's Only new rear fender rack sports a sleek and modern design with added features that make this the ultimate rack for your CRF300L adventures.
- Quality made in the U.S.A. craftsmenship
- Made with 5/8" mild steel tubing and a MIG welded 1/8" steel laser-cut top plate
- Direct mounting of Rotopax mounts eliminates the need for an adapter plate
- Perfect size for the Rotopax 1 gallon fuel tank (larger tanks are not recommended)
- Rack tapers to the rear to follow the lines of the fender
- Top plate provides many attachment points for securing your gear
- Stainless steel mounting hardware and instruction included
- Fast and easy installation
- Seat is easily removed without removing the rack
- Approximately 10" wide and 12" long
CRFs Only CRF250/300L rack installation instructions:
There are 4 bolts, 4 washers, and 2 black nylon spacers in the hardware package.
There are 4 bolts, 4 washers, and 2 black nylon spacers in the hardware package.
1- Remove the stock left and right side bolts that hold the seat in place. These are the long
stainless steel ones towards the rear of the seat.
There is a stock collar washer behind each
stock bolt. Save these for the rack installation.
2 - Remove the 2 bolts, that look the same as the seat bolts, located at the rear of the rear
fender. Save the collar washers from these bolts too, and keep them separate from the ones
from the seat bolts because they are different sizes.
3 - Lift up the rear of the seat enough to slip the front mounts of the rack into place, but dont
remove the seat from the bike. Make sure the stock collar washers are in place at the seat holes
and slide the rack into position. Put the seat back down so it is flush and all the holes line up.
Hand tighten one longer bolt per side.
4 - Line up the rear mounting holes on the rack to the rear holes on your bike. With the stock
collar washer in place, put one black nylon spacer in between the rack mounting hole and the
collar washer, then hand tighten one shorter bolt per side. Do one side at a time.
5 - Tighten up all 4 bolts and enjoy your rack!
stainless steel ones towards the rear of the seat.
There is a stock collar washer behind each
stock bolt. Save these for the rack installation.
2 - Remove the 2 bolts, that look the same as the seat bolts, located at the rear of the rear
fender. Save the collar washers from these bolts too, and keep them separate from the ones
from the seat bolts because they are different sizes.
3 - Lift up the rear of the seat enough to slip the front mounts of the rack into place, but dont
remove the seat from the bike. Make sure the stock collar washers are in place at the seat holes
and slide the rack into position. Put the seat back down so it is flush and all the holes line up.
Hand tighten one longer bolt per side.
4 - Line up the rear mounting holes on the rack to the rear holes on your bike. With the stock
collar washer in place, put one black nylon spacer in between the rack mounting hole and the
collar washer, then hand tighten one shorter bolt per side. Do one side at a time.
5 - Tighten up all 4 bolts and enjoy your rack!
- Brand: CRF's Only
-