Description
Bar End Insert Kit — BRP threaded bar-end insert kit includes two inserts, two flathead bolts, a 5/8-11 tap and instructions for wrap-around handguards.
Product Details
Threaded Bar Inserts ... are a more secure mounting system for aluminum handlebars using wrap-around style enduro hand guards. They are sold as a self install kit that includes two inserts, two flathead bolts to mount your handguards , one 5/8-11 tap to thread your handlebars and an instruction sheet to guide you through the install procedure. These inserts install with a common hex key wrench and can be transferred from one bike to another.
The basic concept of tapping the handlebar to accept the threaded insert works like a charm. By limiting the depth of the tapped handle bar you can tightly bottom out the threaded insert preventing them from loosening. The throttle side insert is approximately 1/4" longer to accommodate the throttle pipe. The tap comes marked so it is simple to tap your bars to the correct depth.
The threaded bar insert is the most solid mount on the market at this time and outperforms anything else.
| NOTE: We recommend using red loctite on the insert to prevent it from coming loose. Azonic double wall and Renthal Twin Tube bars are a larger ID than other aluminum bars and these inserts DO NOT fit these bars. These are the only 2 bars we have found that are not compatable at this time. | ||
Fitment
Universal fitment. Confirm handlebar diameter, clamp spacing, mounting configuration and parent-system compatibility before ordering.
- Brand: BRP
-