Arai Helmets XD-5 Mohave Sage
Description
- PB-cLc² shell is assembled using an assortment of materials
- The
forehead area of the shell is reinforced by a super fiber belt which is
similar to the way in which bands strengthen a barrel
- VAS-A shield system lowered to further improve 'glancing off' ability
- Peak
- Designed
for more effective ventilation, increased high speed flow-through
performance, greater range of adjustability for blocking the sun, and is
more resistant to buffeting, all of which leads to an overall more
comfortable riding experience
- VAS-A Shield System
- Allows for easier and faster shield swaps
- The shield can be attached or removed without the need for any tools
- The peak utilizes only one screw on each side for removal/installation
- Mouth Shutter
- Allows for more fresh air without the need for the mesh vents as seen on predecessors
- Inner Shutter
- Working in conjunction with the mouth shutter, the inner shutter allows you to adjust the mount of airflow entering the helmet
- If the inner and outer shutters are both open, the air will be directed towards your mouth
- If the outer shutter is open and the inner closed, the air will be directed towards the shield and help to reduce fogging
- Front Logo Duct
- Allows for airflow that is unaffected by the rider's position
- Allows for holes in the forehead area for this vent without compromising the helmet's ability to protect
- VAS-A Max-Vision Shield
- The
optional Pinlock® insert for this model has advanced to be effective at
resisting fogging, even in extreme conditions, across the entire field
of view
- Preserves the wide field-fo-view and high level of visibility expected of an XD model
- AR Spoiler
- Set
in a position that makes it ideal for adventure riding, the AR spoiler
contributes to reducing fatigue from turbulent air throughout long
rides, and works to draw out hot air from the crown area
- Odor-Resistant Interior
- Has the same level of acidity as bare skin and has odor-resistant and stain-resistant properties
- The
head-liner is equipped with a removable foam layer on both the left and
right sides, allowing you to remove 5 mm of foam from each side if
desired for micro-fitting
- Air Flap
- The
retractable pull-down spoiler reduces wind intrusion into the bottom of
the helmet and helps to pull out hot and humid exhaled air around the
sculpted leading edges of the cheek pads
- This coordinated ventilation combined with fresh intake from the chin vent, also helps to reduce shield fogging
- Device Compatibility
- The
Hyper-Ridge® has been re-sculpted to provide a flat surface on the
sides to allow for the easy installation of a wide range of
communication devices
- This increases bonding surface between the device and the helmet, and helps to reduce buffeting or possible slip-offs
- Speaker Pocket
- Speakers can be installed directly to the provided hook and loop panel without the need to remove the cheek pad covers
- Both
ear pockets are deep and wide, designed to accommodate even the
thickest speakers with plenty of room to position them to increase
comfort
- Provides a smart way to tackle cable management inside your helmet
- A
pocket to tuck away excess wiring and connectors as well as holes to
easily run wires from side to side, have been incorporated into the neck
roll to prevent wires coming loose while putting on or taking off the
helmet
Reviews
There are no reviews yet so why don't you use the form here and be the first to submit a review?
