Chain guide tabs snap off again -CRF's Only Forums

Dewlap · by **Dewlap** » Tue Nov 04, 2008 9:32 am

Second time the chain guide has fallen off...

THe 1st time it was welded back. There are big rocks in New England.

Any guides that clamp swing arm? Moose?

GET OUT AND VOTE!

Asmith · by **Asmith** » Tue Nov 04, 2008 9:38 am

Either that or have Gevo braze it...

jtsurfs · by **jtsurfs** » Tue Nov 04, 2008 10:20 am

~ wrote:Either that or have Gevo braze it...

HAHAHAHAHA

willard · by **willard** » Tue Nov 04, 2008 11:01 am

That looks just like mine did. Bulletproof Designs makes a billet piece for re-enforcing the KTM tabs. I bought a KTM guide(08) and had the BPD piece welded on. Just put the bike back together but have not ridden it yet as the snow is flying.

gevo · by **gevo** » Tue Nov 04, 2008 12:57 pm

~ wrote:Either that or have Gevo braze it...

Even I've made this joke one too many times by now..

Asmith · by **Asmith** » Tue Nov 04, 2008 1:41 pm

gevo wrote:
~ wrote:Either that or have Gevo braze it...

Even I've made this joke one too many times by now..

Sorry Gev...I didn't mean to burn you...errrr...I mean I'll turn the heat down...errrrr...you know what I mean.

Ernie Pezz · by **Ernie Pezz** » Tue Nov 04, 2008 2:10 pm

gevo wrote:
~ wrote:Either that or have Gevo braze it...

Even I've made this joke one too many times by now..

This one never gets old to me!

tkrrox · by **tkrrox** » Tue Nov 04, 2008 3:07 pm

me neither....turn up the heat i think the molecular bond on the bronze will be better

cbutler · by **cbutler** » Tue Nov 04, 2008 3:08 pm

weld the tabs back on and get a T.M. designworks guide. They flex on impact.

Ernie Pezz · by **Ernie Pezz** » Tue Nov 04, 2008 3:23 pm

tkrrox wrote:me neither....turn up the heat i think the molecular bond on the bronze will be better

LMMFAO!!! Come on Gevo, I've seen you dish it out too! After all, it is all in fun dude! This site would be totally boring without a little ribbing now and then!

gevo · by **gevo** » Tue Nov 04, 2008 3:28 pm

Ernie Pezz wrote:
tkrrox wrote:me neither....turn up the heat i think the molecular bond on the bronze will be better

LMMFAO!!! Come on Gevo, I've seen you dish it out too! After all, it is all in fun dude! This site would be totally boring without a little ribbing now and then!

OH, im not offended or anythign like that.. seriously..? My skin (ok.. skull) is MUCH thicker than that..

2 days ago couple friends and myself were walking on teh street in burbank and i noticed some extremeley crappy welds on a metallic gateway entrance deal for this multi million dollar entertainment shopping center.. Ofcourse, I mention it to my friends and I am still taking . for it..lol.. I do it to myself, I allready know..
I'm content

Ernie Pezz · by **Ernie Pezz** » Tue Nov 04, 2008 3:56 pm

I knew you could handle it brutha! Hey, did you guys get a bunch of rain over the last couple of days? I can't wait to get out and ride. I think this Sun is gonna be the day! Should be a great dust free day of riding!!

Asmith · by **Asmith** » Tue Nov 04, 2008 4:14 pm

gevo wrote:i noticed some extremeley crappy welds on a metallic gateway entrance deal for this multi million dollar entertainment shopping center.. Ofcourse, I mention it to my friends and I am still taking for it..lol.. I do it to myself, I allready know..
I'm content

I've never done that before...

willard · by **willard** » Tue Nov 04, 2008 5:58 pm

So here is the Bulletproof Designs bracket and the KTM guide. I had the welder add the inside tab and he could have moved the whole thing back towards the sprocket but should be fine.
[/img]

[img][img]http://i475.photobucket.com/albums/rr115/willard450x/heelmoto018.jpg[/img][/img]

Dewlap · by **Dewlap** » Wed Nov 05, 2008 6:13 am

willard wrote:So here is the Bulletproof Designs bracket and the KTM guide. I had the welder add the inside tab and he could have moved the whole thing back towards the sprocket but should be fine.

Thx!

Who is online

About Us

Useful Links