Blowing fuse
  • JJDiekman
    Posts:2
    Joined:Mon Feb 22, 2016 5:50 am
    Blowing fuse

    by JJDiekman » Mon Feb 22, 2016 5:54 am

    My 2015 crf250l keeps blowing the turn signal/horn/brake light fuse, any idea why this would be happening? I have stock lights and everything was fine and now it just keeps blowing the fuse after about 5 min of ride time.
    any help would be appreciated
  • Aussiecrf230
    Posts:1964
    Joined:Fri Jan 06, 2006 11:11 pm

    by Aussiecrf230 » Tue Feb 23, 2016 3:25 am

    You will physically need to trace the wiring from the fuse out to the various items it provides power too. There must be a bare wire somewhere. Sometimes the turn signal switches can short out to the handle bar. If the bike is still new the dealer may fix it under warranty as long it is not caused by damage when riding.
    Ray
    Australia

    CRF230F 2004
    C30F Power Up needle
    Mains 132
    Idle 45
    2 turns out
    Baffle out, Screens In

    It starts,it runs,it gets to where all CRFs can get to without the valve or valve plate dramas
  • JJDiekman
    Posts:2
    Joined:Mon Feb 22, 2016 5:50 am

    by JJDiekman » Tue Feb 23, 2016 6:55 am

    Thanks for the help looks like I have to tear down the bike this weekend

Who is online

Users browsing this forum: No registered users and 7 guests