250x stall and wont start when hot
  • lestruites
    Posts: 8
    Joined: Tue May 01, 2018 12:48 pm

    Re: 250x stall and wont start when hot

    by lestruites » Fri Sep 07, 2018 4:40 pm

    almost done putting everything together but ... what is the secret to put the air box boot to the carb ... been playing with it for hours without success
    thank
  • User avatar
    JimDirt
    Posts: 4406
    Joined: Sat Nov 25, 2006 6:31 pm

    Re: 250x stall and wont start when hot

    by JimDirt » Fri Sep 07, 2018 5:43 pm

    Don't install the bottom subframe bolts till you get the boot on , just the single top bolt , then i use a long skinny flat blade screwdriver to go between the boot and the carb inlet , and "work" the boot around , once you see its seated on the ignition side , then take a flashlight and flip out the kickstart so you can see on that side , if its all completely on , then tighten the clamp and install the lower subframe bolts , its kind of a pain , but once you do it a few times , it gets much easier
    2020 CRF450R
    2006 CRF450X
    Image
    Weiser , Idaho

Who is online

Users browsing this forum: No registered users and 2 guests