Hi again, so, I got the bike to finally crank over with the e-start. It was as someone suggested the battery. Once I replaced it the starter turned over no problem.
So, now it won't start. As back ground I just rebuilt the top end, all bearings, cleaned up the wiring harness, made some new connections that looked bad and just about replaced everything I could. All this was prompted because last season it was running poorly. So, I thought a complete rebuild would be a good idea.
OK, so there is spark, gas in the carb, and everything seems like it should be ready to start up. But no go. It just cranks away with occasional pop and one back fire. Frustrating!! I have even put on a brand new carb I have with no change. I am guessing it is an electrical problem. Any suggestions on where to start looking? Any help appreciated. Joe??
Thanks again, robert