Stage 2 hot cam install assistance
  • Elwir
    Posts:9
    Joined:Tue Aug 26, 2014 11:55 am
    Stage 2 hot cam install assistance

    by Elwir » Mon Jun 20, 2016 5:40 pm

    Stock 06 thats just been reshimmed. Ive purchased a stage 2 hot cam for a good price but the truble is installing the damn cam. I know i have to take off the stock decompresser and bearing, but how? Its so tight that i dont want to snap the bolt. And what about shimming? Its said the stock springs and ect. could be left stock. Any suggestions?

    Its said that theirs multiple videos and and many tutorials for this yet i cant find one for the crf250
  • User avatar
    JimDirt
    Posts:4406
    Joined:Sat Nov 25, 2006 6:31 pm

    by JimDirt » Wed Jun 22, 2016 6:36 pm

    everything from the stock cam should swap over , the valves will have to be re-shimmed because the cam is different , so the tolerance will be different

    I can't remember on the 250 , but i believe the bearing has to be pressed off/on , you can PM Ken and he could tell you for sure
    http://www.crfsonly.com/forum/profile.p ... rofile&u=3

    Sorry i can't be more help , but its been a while since i messed with a CRF250 , but Ken does all the time , so he would be the best bet for answers
    2020 CRF450R
    2006 CRF450X
    Image
    Weiser , Idaho

Who is online

Users browsing this forum: No registered users and 6 guests