[lestruites]

almost done putting everything together but ... what is the secret to put the air box boot to the carb ... been playing with it for hours without success
thank

[JimDirt]

Don't install the bottom subframe bolts till you get the boot on , just the single top bolt , then i use a long skinny flat blade screwdriver to go between the boot and the carb inlet , and "work" the boot around , once you see its seated on the ignition side , then take a flashlight and flip out the kickstart so you can see on that side , if its all completely on , then tighten the clamp and install the lower subframe bolts , its kind of a pain , but once you do it a few times , it gets much easier