Stainless steel brake line
Posted: Fri May 01, 2020 6:35 pm
Does anyone know where I can get a front brake line clamp for a stainless steel brake line. I have an 08 Crf150r, the stock one is too big with the brake line being narrower.
Sorry for the delayed reply ...
Are you talking about the clamp on the fork guard ??? , if so , you can either build it up with shrink tubing , or wrap electrical tape around it , the other alternative which may look better , is go to one of your local auto parts stores or even a Ace Hardware (any hardware store that carries a lot of nuts/bolts in the slide out bins) , and look in their nut/bolt bin section , they usually have rubber grommets that have a space between each end , which should be long enough to fit between the clamp pinch area just look for one that is similar size to the brake line , if you can't fit/stretch it over the fitting on the end of the brake line , then just cut it lengthwise , splitting it , then place it around the line and put it in the clamp and clamp it down ....
