Jetting and a few other questions for a 07 150R
Posted: Sat Feb 14, 2015 3:08 pm
So here is what I am working with jet wise.
Starter jet 68
Pilot Screw 2-1/4 turns
Slow jet 42
Main jet 140
Jet needle NHNT
Jet needle clip 3
Leak jet 60 has a good squirt about 5.5ft
My riding will mostly be from 500ft to 1000ft. At about 70 to 100 degrees. Most of the time being 80 to 90.
So I read that the 07 jetting specs are trash and the later jets are the way to go
So according to the book I need
Starter jet Cant find
Pilot Screw 2 turns
Slow jet 38
Main jet 135
Jet needle NMQS
Jet needle clip 3
Leak jet Cant find
To keep in mind there is a Pro Circuit T-5 Slip-On Exhaust. Which I believe was put on to quiet the bike down some. Does this new jetting specs look right?
Starter jet 68
Pilot Screw 2-1/4 turns
Slow jet 42
Main jet 140
Jet needle NHNT
Jet needle clip 3
Leak jet 60 has a good squirt about 5.5ft
My riding will mostly be from 500ft to 1000ft. At about 70 to 100 degrees. Most of the time being 80 to 90.
So I read that the 07 jetting specs are trash and the later jets are the way to go
So according to the book I need
Starter jet Cant find
Pilot Screw 2 turns
Slow jet 38
Main jet 135
Jet needle NMQS
Jet needle clip 3
Leak jet Cant find
To keep in mind there is a Pro Circuit T-5 Slip-On Exhaust. Which I believe was put on to quiet the bike down some. Does this new jetting specs look right?