CRF's Only Forums

i was tightening my bolts for my plastics and i tightened the front number plate and the bolt brock inside the top fork clamp what tool do i get it out with and were can i get it??????

you'll have to drill the broken bolt out

1st find or buy at a hardwear/auto store a drill piece for drilling metal thats the same size as the broken bolt then drill it out
you'll have to buy a re-threading tool costs less than $10 or some hardwear shops can do it for nothing (just take the top triple clamp off first )
then buy a the bolt either from a honda dealer or just buy a similar bolt from the hardwear store

Reverse drill bit and extractor kit.

http://www.sportsmansguide.com/net/cb/Titan-13-Pc-Screw-Extractor-and-Reverse-Drill-Bit-Set.aspx?a=527494&kwtid=299731