Page 1 of 1
KY area
Posted: Sun Aug 26, 2007 6:32 pm
by jlee_evans
Anyone have a 450X close to the southern region of KY? I'm interested in jetting specs for this area, just to open the air box and baffles out of the pipe.
Posted: Wed Jul 30, 2008 12:11 pm
by minton227
I don't have jetting specs but I can tell you that Bell's Suzuki has one of the only dyno's in the area. That's a sure way to get the most our of your bike.
i do
Posted: Sun Aug 03, 2008 4:17 am
by daves 450x
put a 170 main 2 sizes bigger in the pilot and find a couple tiny washers to raise the needle the distace of a couple positions since the needle isnt adjustable. cut the airbox top(a monkey can do it) and get a new hi flow exhaust and header(gotta ahve the header) expect to pay 7-800 bucks. The washers i am talkin about are tiny very tiny but it beats buying a new needle. mine is done that way and works fine i have NO trouble whatsoever and i ride windrock and blackmountain. The main thing is go to 170 and two sizes on the pilot which will help with the bikes cold nature.