[NCLR1]

Well, a little bit of fear is good. It keeps you from doing something you shouldn't. But, don't let it keep you from riding. The vet track at LE is ok to putt around on and learn. It gets a little rutty, but nothing scary. Well, tell Ryan to hurry and figure out where he wants to go, I need time to prepare the family.

[NCLR1]

Saturday night at the track?

I would like to bring the camper but have to check with DH. Still not clear on what track Ryan wants to go to. Will post as soon as they make a decision.

Anyone else ride track? The more the merrier!! Ryan is an intermediate beginner(but advancing fast) hubby is just testing the waters and I am just plain scared!!! Only ride when on a private track.

Does DH stand for "Da Husband"? I only ask cause things have been getting a little crizazy around here lately. Holla

[Beast Rider]

Dear Husband....Dear Hubby.....Da main man !!!

[sbronco68]

Sharon, the forecast says 88 degrees with a 20% chance of rain, so it looks like it could be a great day for track riding. Are you guys planning on camping on Saturday night at the track?

Hey Shawn, are you down too?

Hey guys, Sorry for the late reply been a busy week. If you guys are talking about hitting the track sep 8/9 count me in. Is the wx prediction of 88 and 20% rain from the farmer's almanac?

[NCLR1]

Sharon, the forecast says 88 degrees with a 20% chance of rain, so it looks like it could be a great day for track riding. Are you guys planning on camping on Saturday night at the track?

Hey Shawn, are you down too?

Hey guys, Sorry for the late reply been a busy week. If you guys are talking about hitting the track sep 8/9 count me in. Is the wx prediction of 88 and 20% rain from the farmer's almanac?

hahaha. No. It's from weather channel.com. good to hear you can make it, now I have to talk to Nat.

[Asmith]

Stainless this time or OEM again

?

Nicoll racing did the valves(DH was too busy at work) said they were trying some new valves and guaranteed them for 1 year. The valves were Pro-X high performance titanium and yes he has replaced alot of them. He is replacing them with Faction stainless steel. I don't know much about them but can't be worse than the stock ones. Any input would be appreciated. Next set my husband and Ryan will be doing.

Sharon,

Those are excellent valves, actually manufactured by Ferrea for Faction MX. The kit is $ 165 for Valves, springs, retainers and locks. make sure they recut the seats, if there is enough left...

[Beast Rider]

Thanks Paul, I'm glad to hear that it's a good manufacturer.

[sbronco68]

So anyone riding this weekend? Track or Trail?

[Beast Rider]

We are riding Amago track Sat. afternoon and Sun morning. Tony is on the fence, nursing a cold. I'm sure he will PM you.

[NCLR1]

Even if I can't ride, I would like to bring Dylan out to ride.