Page 1 of 1

2006 Honda 250

Posted: Thu Sep 19, 2019 1:09 pm
by Kenny07
Had to change the shifter so took the entire bike apart. Got it all back together and it won’t kick over. Checked compression, spark plugs, valves, fuel intake, basically everything I can think of. Honda is also stumped. Any suggestions?

Re: 2006 Honda 250

Posted: Thu Sep 19, 2019 4:39 pm
by JimDirt
Welcome to the site !! \:D/

You have me a little confused here .... You said you had to change the shifter ..... Why would you need to take the bike apart to change the shifter ??? , its 1 bolt and it slides off :-k 8-[

Are you meaning you had to take the Shift Drum , or shift shaft , or shift fork out in the transmission ???? , that would make more sense

As for your issue , I would suspect you have inadvertently missed plugging in a connector somewhere ..... it is highly possible when you removed the gas tank , you accidentally pulled off the power wire that goes to the coil with the fuel valve when pulling the tank out , , with the tank off look and see if its unplugged , I think that will be your problem ... ;)

Re: 2006 Honda 250

Posted: Sat Oct 05, 2019 5:45 am
by Hammer
An update to see if you fixed it please.