Page 1 of 1
programmer for 2010 CRF250
Posted: Mon Aug 26, 2013 6:18 am
by gmgearhead
Who is the best programmer? Have a 2010crf250 that we bought and it turns out it is AJ Catanzaro's old Monster SX practice bike. I am sure it has a program in it already. My son races MX and it just doesnt seem to pull hard on a longer holeshot or long straights even with taller gear ratio. It revs quick and pulls hard lower RPM range.It does have port work and DR.D full exhaust and now a high compression piston.Looked to be stock cam. Goin to change to a different cam and need a good program to maximize the port-work,cam,exhaust and piston.
Posted: Tue Aug 27, 2013 2:01 pm
by crfsonly
we do ECM programming:
http://www.crfsonly.com/catalog/product ... ts_id/4976
there's only so much the ECM can do for you. compression, port work, cam, etc all play a big role in the kind of power you are talking about. i don't know who did your port work but this can have a negative impact if not done correctly.
Posted: Wed Aug 28, 2013 4:34 pm
by gmgearhead
It was done by TLR performance.How long is the turn around time?
Posted: Wed Aug 28, 2013 4:41 pm
by crfsonly
Turnaround is typically within 24 hours of receiving the ECM.
ecm program
Posted: Wed Sep 04, 2013 5:53 am
by gmgearhead
ok downloaded the form. where do i send the ECM to? Should i include a phone number in case i need to be contacted?
Posted: Wed Sep 04, 2013 4:33 pm
by crfsonly
place the order for the service online:
http://www.crfsonly.com/catalog/product ... ts_id/4976
once placed we'll send you information on where to send the ECM. on the form, fill out the form completely and put your order number on it as well.
program
Posted: Wed Oct 02, 2013 4:31 am
by gmgearhead
had first race with new program in the ECM ya"ll did for us. Got 7th on the hole shot..!!!
Bike is running alot better..my son is very happy. Money well spent..thank you..!!!