programmer for 2010 CRF250
  • gmgearhead
    Posts: 17
    Joined: Sat Feb 02, 2013 6:28 am

    programmer for 2010 CRF250

    by gmgearhead » Mon Aug 26, 2013 6:18 am

    Who is the best programmer? Have a 2010crf250 that we bought and it turns out it is AJ Catanzaro's old Monster SX practice bike. I am sure it has a program in it already. My son races MX and it just doesnt seem to pull hard on a longer holeshot or long straights even with taller gear ratio. It revs quick and pulls hard lower RPM range.It does have port work and DR.D full exhaust and now a high compression piston.Looked to be stock cam. Goin to change to a different cam and need a good program to maximize the port-work,cam,exhaust and piston.
  • User avatar
    crfsonly
    Owner
    Posts: 9651
    Joined: Thu Apr 01, 2004 3:45 pm

    by crfsonly » Tue Aug 27, 2013 2:01 pm

    we do ECM programming:

    http://www.crfsonly.com/catalog/product ... ts_id/4976

    there's only so much the ECM can do for you. compression, port work, cam, etc all play a big role in the kind of power you are talking about. i don't know who did your port work but this can have a negative impact if not done correctly.
    OEM Parts for Honda - Yamaha - Suzuki - Kawasaki: http://yeltrik.com
    _________________
    CRF Parts and Accessories: http://crfsonly.com
  • gmgearhead
    Posts: 17
    Joined: Sat Feb 02, 2013 6:28 am

    by gmgearhead » Wed Aug 28, 2013 4:34 pm

    It was done by TLR performance.How long is the turn around time?
  • User avatar
    crfsonly
    Owner
    Posts: 9651
    Joined: Thu Apr 01, 2004 3:45 pm

    by crfsonly » Wed Aug 28, 2013 4:41 pm

    Turnaround is typically within 24 hours of receiving the ECM.
    OEM Parts for Honda - Yamaha - Suzuki - Kawasaki: http://yeltrik.com
    _________________
    CRF Parts and Accessories: http://crfsonly.com
  • gmgearhead
    Posts: 17
    Joined: Sat Feb 02, 2013 6:28 am

    ecm program

    by gmgearhead » Wed Sep 04, 2013 5:53 am

    ok downloaded the form. where do i send the ECM to? Should i include a phone number in case i need to be contacted?
  • User avatar
    crfsonly
    Owner
    Posts: 9651
    Joined: Thu Apr 01, 2004 3:45 pm

    by crfsonly » Wed Sep 04, 2013 4:33 pm

    place the order for the service online:

    http://www.crfsonly.com/catalog/product ... ts_id/4976

    once placed we'll send you information on where to send the ECM. on the form, fill out the form completely and put your order number on it as well.
    OEM Parts for Honda - Yamaha - Suzuki - Kawasaki: http://yeltrik.com
    _________________
    CRF Parts and Accessories: http://crfsonly.com
  • gmgearhead
    Posts: 17
    Joined: Sat Feb 02, 2013 6:28 am

    program

    by gmgearhead » Wed Oct 02, 2013 4:31 am

    had first race with new program in the ECM ya"ll did for us. Got 7th on the hole shot..!!!
    Bike is running alot better..my son is very happy. Money well spent..thank you..!!!

Who is online

Users browsing this forum: No registered users and 3 guests