Page 1 of 1
yz250 help
Posted: Mon Jul 12, 2010 7:19 pm
by bamm
ive never worked on a two stroke, so maybe you guys can help me out.....my yz250 will only start with the choke on and it idles rough, while smoking out of the radiator vent tube. turn off choke and give throttle and it bogs and dies.
Posted: Mon Jul 12, 2010 7:27 pm
by Asmith
It's missing two strokes...
yup
Posted: Mon Jul 12, 2010 7:33 pm
by bamm
har dee har har har....
no really wog what the deal?
Re: yup
Posted: Mon Jul 12, 2010 7:55 pm
by Asmith
bamm wrote:har dee har har har....
no really wog what the deal?
Clogged pilot would be my first thought...I'm sure you threw in the "smokin out the radiator vent hose" just to screw with us huh?
yup
Posted: Mon Jul 12, 2010 11:07 pm
by bamm
no for real there was smoke comin out the rad vent hose....wtf?
charlie says maybe blown head gasket....gonna start with the carb, and go from there....
Posted: Tue Jul 13, 2010 9:00 am
by slomotobug
When was the last topend done on it? If you don't know, then it's a good time to do it for peace of mind, VERY cheap and easy on a 250 2stk, would take care of a leaky head gasket while in there and give good peace of mind knowing what shape it's in. Crappy reeds will cause all kinds of running issues too, very commonly neglected part of a 2 stroke maintinance. Also as mentioned before, if it sat at all with gas in the carb, almost always plugs the pilot jet, and even the main sometimes too.
yup
Posted: Tue Jul 13, 2010 5:23 pm
by bamm
thanks! yeah it definitely needs a top end regardless of what the issue currently is. the poor yammie doesnt get much love guess its time!
Posted: Tue Jul 13, 2010 5:45 pm
by charlie b
time to sell it
