Jet Recommendations for a 2004 CRF80
Posted: Tue Feb 16, 2010 3:45 pm
Searched the forum for some jetting recommendations for a CRF80 and found a few, but they were a little old.
Checking to see if the info in this thread is still current.
http://www.crfsonly.com/forum/viewtopic.php?t=11825
Here they recommend a 100 main jet and leaving the pilot at stock. We ride mostly between 900-1400 ft. and the bike is bone stock right now. I'm planning on putting in some airbox vents, and putting a couple of holes through the exhaust baffle.
I'd like to do whatever jetting is required to give the bike a little more oomph. (Yes, a bigger bike is next).
Are these suggestions from 2007 still current and accurate or might there be other thoughts on the matter?
Thanks in advance for your reply...
Checking to see if the info in this thread is still current.
http://www.crfsonly.com/forum/viewtopic.php?t=11825
Here they recommend a 100 main jet and leaving the pilot at stock. We ride mostly between 900-1400 ft. and the bike is bone stock right now. I'm planning on putting in some airbox vents, and putting a couple of holes through the exhaust baffle.
I'd like to do whatever jetting is required to give the bike a little more oomph. (Yes, a bigger bike is next).
Are these suggestions from 2007 still current and accurate or might there be other thoughts on the matter?
Thanks in advance for your reply...