Page 1 of 1
WTB Fan Kit that will fit my 05 450X with a 3.2 gal IMS tank
Posted: Sat Jul 30, 2016 6:11 pm
by dlee
Anyone out there running a fan for there radiator with a 3.2 gallon IMS tank?
Would like to know your set up and where you bought it
Every now and then on a tight trail on a 95 degree day I will boil over, not very often
Thanks for the info in advance
Posted: Sat Jul 30, 2016 6:15 pm
by dlee
Ken,
Do you have any thoughts on this?
Posted: Sun Jul 31, 2016 6:02 am
by Back2-2
Check out Jim Dirts fan set-up he has in the "how to" section. really clean deal.
Link?
Posted: Mon Aug 01, 2016 5:23 am
by dlee
Do you have a link, I can't seem to find it
Thanks
Posted: Mon Aug 01, 2016 7:56 am
by JimDirt
It is actually in this(450X) forum , for some reason the pictures are not showing up , so i will try to find all the old ones and re-post them , but its basically buying the parts and doing it from scratch , its not a "kit" like Ken sells here , but this is my post
http://www.crfsonly.com/forum/viewtopic ... n&start=15
The kit Ken sells
http://www.crfsonly.com/catalog/product ... ts_id/5759
Or this one from Trail Tech
http://www.crfsonly.com/catalog/product ... ts_id/5360
Hope that helps
