Nissin brake pads
  • whtshdwwz
    Posts:9
    Joined:Wed Apr 02, 2008 7:59 pm
    Nissin brake pads

    by whtshdwwz » Sun Jun 28, 2015 6:17 pm

    I just put some factory honda nissin brake pads on my bike, i broke the glaze on the rotors but i am getting alot of squeaks from the pads. Is this normal?
  • User avatar
    JimDirt
    Posts:4406
    Joined:Sat Nov 25, 2006 6:31 pm

    by JimDirt » Sun Jun 28, 2015 7:42 pm

    Are the brakes dragging ?(does the wheel spin freely or is it tight ??)

    Usually if you drag the brakes a lot (i do on the MX track) your brakes will squeal , look at your rotor , if its blue or burnt looking then this is the case , you might even have to adjust your pedal lower so your foot does not rest on it while riding (i am assuming its your rear brake that is squealing) , if you ride aggressively , then its "normal" , if your riding easy and not hard on the brakes , then there is a issue with either the caliper sticking or the pedal needs adjustment because the pedal is higher than the footpeg
    2020 CRF450R
    2006 CRF450X
    Image
    Weiser , Idaho

Who is online

Users browsing this forum: No registered users and 7 guests