[Remiix]

How have you guys mounted your front and back indicators? Did you make something yourselves, like a bracket of some sort? I need some ideas to mount mine because I am having trouble. I have a 05 450x. Cheers

[riddler9]

You need to look close (that was kind of the point), but you can see a stick-on indicator on the side of the front mask and on the side of the plate holder under the rear fender.

The indicators have double stick tape on them.

[Old Dude]

I used Baja Designs lights and just drilled into the headlight shell and license plate mount on one project. On another build I used Tusk Racing stalk (or stem) mounted lights but supported them with a modified metal conduit connector. Aluminum or thin walled tubing will work as well. Cut the tubing to the appropriate length and slip it over the"flexible stalk" I then used a flat washer on the inboard side (outside surface of the license plate/tailight mount) and one on the inside between the lock washer and plastic.
O.D.

[Remiix]

I don't really want to drill into the front headlight. I am trying to avoid doing that. The rear, I will just drill into the plate holder.

[Remiix]

I used Baja Designs lights and just drilled into the headlight shell and license plate mount on one project. On another build I used Tusk Racing stalk (or stem) mounted lights but supported them with a modified metal conduit connector. Aluminum or thin walled tubing will work as well. Cut the tubing to the appropriate length and slip it over the"flexible stalk" I then used a flat washer on the inboard side (outside surface of the license plate/tailight mount) and one on the inside between the lock washer and plastic.
O.D.

I figured it out. Pretty hard to explain how I'm going to do it, but I'm making a little bracket sort thing for the front. Thanks for the answer