Page 1 of 1
New 2012 with all the aftermarket parts on.
Posted: Wed Jul 10, 2013 5:41 pm
by crazybrother
Posted: Wed Jul 10, 2013 6:50 pm
by crfsonly
i only see one problem...your garage is way too clean!

looking good as usual!
Posted: Wed Jul 10, 2013 6:54 pm
by riddler9
looking good.
Are those the stick-on rear turn signals? If so you may want to keep an eye on the tape. I ended up plastic welding ours after finding the sticky was not so sticky. I also put a bead of silicone around the lens to keep the moisture out.
Posted: Wed Jul 10, 2013 10:13 pm
by crazybrother
riddler9 wrote:looking good.
Are those the stick-on rear turn signals? If so you may want to keep an eye on the tape. I ended up plastic welding ours after finding the sticky was not so sticky. I also put a bead of silicone around the lens to keep the moisture out.
No, I drilled holes and they are bolted through.
Posted: Thu Jul 11, 2013 8:27 am
by JimDirt
Those radiator guards look stout !
The only thing i noticed looking at the pictures is that there is 1 thing seriously wrong
Why is my bike in your garage ?

Posted: Thu Jul 11, 2013 3:03 pm
by crazybrother
All finished... For now...

Posted: Mon Jul 22, 2013 4:00 pm
by crazybrother
Posted: Mon Jul 22, 2013 4:53 pm
by crfsonly
looking good as usual!
Posted: Thu Jul 25, 2013 5:22 am
by FLASH
Show off

, With a bike like that you would never see me for days .
Well done mate .
FLASH