[GMAN]

Hey Guys - Well, after reading and reading all the tips you guys talk about I finally opended the air box and installed the JD Kit. My bike did have a flat spot so it was time.

My final stage 1 mod was to be the fuel screw. When unscrewing the thing it popped out along with the spring, washer and o-ring. I won't talk about how long it took me to find the stinkin o-ring but the time could be measured in hours. It was like an angel left it when I finally found it.

So in what order do these parts go back otgether? I'm thinking spring 1st, washer 2nd and then o-ring last.

I'm going to follow ~'s post when setting it. That was an excellent post dude!

Thanks

[Asmith]

The spring goes on the shaft first then the washer then the o-ring.

The o-ring seals the hole in the carb, the washer allows the spring to provide tension against the o-ring.

[GMAN]

Thanks ~! We're heading for Camp C out near Cal City this weekend to test it out.

[Asmith]

Thanks ~! We're heading for Camp C out near Cal City this weekend to test it out.

I'm jealous!!!

I Hope it rips for you!