Page 1 of 1
ATTN: Tall guys
Posted: Wed Jan 24, 2007 12:40 pm
by Smash
Hey Guys,
If you could make a taller mount that moves the bars up more than the BRP and forward, how much taller and more forward would you make it?
Re: ATTN: Tall guys
Posted: Wed Jan 24, 2007 1:03 pm
by nowazzu
Are you going to anodize those too? Those pink things you gave me look nice!
Re: ATTN: Tall guys
Posted: Wed Jan 24, 2007 1:17 pm
by Smash
nowazzu wrote:Are you going to anodize those too? Those pink things you gave me look nice!
Did yours turn pink?
Mine are still red.
Probably no anodizing in red, red/pink is horrible.
Re: ATTN: Tall guys
Posted: Wed Jan 24, 2007 4:42 pm
by cbutler
Smash wrote:Hey Guys,
If you could make a taller mount that moves the bars up more than the BRP and forward, how much taller and more forward would you make it?
I use THUMPER RACING bar elevators part# HA-BE-1 the rise is 1.5" and1"foreword .
www.thumper-racing.net
Posted: Wed Jan 24, 2007 4:48 pm
by bocephus450x
go to custom chrome
www.customchrome.com and get yourself some ape hangers
Posted: Wed Jan 24, 2007 5:19 pm
by OLDFATGUY
Smash, how tall are you? mine is 1.5 up and 1.5 forward. they are suzuki risers. I think thumper racing has about the same thing. OFG
Posted: Wed Jan 24, 2007 6:29 pm
by Smash
OLDFATGUY wrote:Smash, how tall are you? mine is 1.5 up and 1.5 forward. they are suzuki risers. I think thumper racing has about the same thing. OFG
But do they work with the BRP stabilizer mount or? Gotta keep the stabilizer.
Posted: Wed Jan 24, 2007 8:34 pm
by cbutler
the thumper risers will sit in any 7/8 clamp if you have fat bars you are SOL
Posted: Thu Jan 25, 2007 6:41 am
by XGiant
I would like something adjustable so I could decide, but at least an inch forward. I have already raised the bars with the BRP sub mount.
Posted: Thu Jan 25, 2007 12:10 pm
by OLDFATGUY
Posted: Thu Jan 25, 2007 3:06 pm
I'd like it if the BRP triple clamp went forward more about maybe 1/2 ".
I'm 6'5" with long arms (35"),and the tall BRP bar mounts work good enough, the rest of the height needed was just CRF Mid ProTapers.
In a perfect world, I'd like about another 1/2" more forward. That's just about what I got with my Applied set-up. Doug