Page 1 of 1
jetting for cal city
Posted: Tue Jan 23, 2007 9:22 pm
by rnyjohnson
i got my jd kit and i'm getting ready to tackle this carb
what jets do you guys think for cal city
Posted: Tue Jan 23, 2007 9:26 pm
by Ernie Pezz
Follow the directions in your kit for the elevation you ride at. You should be from sea level to 3k ft.
for Cal City.
Posted: Tue Jan 23, 2007 9:55 pm
by Zanardi4
I ride mostly at Cal City. Here are my current SoCal winter settings. Your mileage may vary.
2005 450x
Airbox side vents opened and snorkel removed
Twin Air Powerflow filter
Smog crap removed
White Bros E2 with sparky quiet tip in
Stock Pilot (45)
Fuel Screw 2.5 turns out
Red tip JD needle with clip in the middle position
170 Main jet
I'll be going with the 48 pilot really soon so I don't have to back the fuel screw out so much due to this colder denser winter air.
Good luck!
Posted: Wed Jan 24, 2007 8:58 am
by nminus1
Open airbox
Backfire screen removed
Twin air filter
Smog gone
Baffle out
170 main
48 pilot
JD red needle stock setting for clip
1 1/2 out on fuel screw
Posted: Wed Jan 24, 2007 9:27 am
by SoylentGreen
Open airbox
Backfire screen removed
Twin air filter
Smog gone
450R Exhaust
170 main
45 pilot
JD red needle stock setting for clip
1 3/4 out on fuel screw
Posted: Wed Jan 24, 2007 11:25 am
by nowazzu
nminus1 wrote:Open airbox
Backfire screen removed
Twin air filter
Smog gone
Baffle out
170 main
48 pilot
JD red needle stock setting for clip
1 1/2 out on fuel screw
Bingo....