Page 1 of 1
CRFs Only Shark Fin Pics
Posted: Thu Dec 14, 2006 6:29 pm
by paul turner
here is 4 pics of the new Shark Fin, i hope this is useful.
and the backside
paul
Re: CRFs Only Shark Fin Pics
Posted: Thu Dec 14, 2006 7:08 pm
by Scott450x
[quote="paul turner"]here is 4 pics of the new Shark Fin, i hope this is useful.
Useful for what?.............. Just kidding; nice looking fin. It needs some scars though. Hope to see it in June.
Looks like there should be a CRF's Billiards day in the future at your house. Come on Paul lets schedule it!
Posted: Thu Dec 14, 2006 7:12 pm
by gj2slick
Looks like very high quality craftsmanship and A piece
of art.I so dig the removeable fin feature.
Speaking of art I like the picture of the SharkFin playing pool better than the one of Dogs playing pool!
Almost
SLICK
Posted: Thu Dec 14, 2006 7:13 pm
by jww
Are the threaded holes on the back of the fin from the machining process or do they serve a purpose?
Posted: Thu Dec 14, 2006 7:20 pm
by PhilM
How much are they?? Will they fit a 250x as well?
Thanks
Posted: Thu Dec 14, 2006 7:23 pm
by paul turner
jww wrote:Are the threaded holes on the back of the fin from the machining process or do they serve a purpose?
yes, they are a threaded hole x 4, i do not have a clue, but would bet they were for the jig.
paul
Posted: Thu Dec 14, 2006 7:26 pm
by paul turner
PhilM wrote:How much are they?? Will they fit a 250x as well?
Thanks
123$ + tx. & ship.
Yes, they fit all CRFs, except 150 & 230.
http://www.crfsonly.com/catalog/product ... ts_id/2100
paul
Posted: Thu Dec 14, 2006 7:45 pm
by Old-Man
Paul what wrong with you , it's not on the bike yet? LOL
Thanks for the pictures. It does look like it is very well made. Now please put it on the bike and take some pictures of it.
Posted: Thu Dec 14, 2006 8:03 pm
by paul turner
Old-Man wrote:Paul what wrong with you , it's not on the bike yet? LOL
Thanks for the pictures. It does look like it is very well made. Now please put it on the bike and take some pictures of it.
i'm a wuss, its too cold out in the garage in the evenings now. maybe Saturday, if i don't HAVE to go to Knotts Berry Farm.
paul
Posted: Thu Dec 14, 2006 8:50 pm
by jww
Install tip......When I put mine on there were a ton of shavings in the hole for the pin. Make sure you blow it out.
As for the holes. I dont know if the need would ever arise but one could bolt in their old plastic piece. Maybe a little extra protection in the mud or snow.
Posted: Thu Dec 14, 2006 8:57 pm
by paul turner
jww wrote:
As for the holes. I dont know if the need would ever arise but one could bolt in their old plastic piece. Maybe a little extra protection in the mud or snow.
i like that idea, i'll check it out, thanks,
paul