Page 1 of 1
New spokes for my 07 CRF250R 19" rear wheel?
Posted: Sun Mar 03, 2013 2:59 pm
by RamboEinar
Hello!
My rear wheel got some bend spokes and half are seized up and just rotate in the hub when i trying to tighten them. So i guess i need to replace them.
But do "all" 19" spokes fit my wheel?
My wheel got the stock 07 OEM hub and 19" x 1.85 "Pro-Wheel" rim.
Link:
http://www.prowheelracing.com/honda-big ... -19-black/
Any suggestions?
Posted: Sun Mar 03, 2013 3:05 pm
by crfsonly
Posted: Sun Mar 03, 2013 3:43 pm
by RamboEinar
Great, thanks!
Will these spokes only fit Pro-Wheel or am i able to use these on a Excel rim as well?
Posted: Sun Mar 03, 2013 3:51 pm
by crfsonly
yes, they will work with the Excel as well. in our testing they are not as strong as the Bulldog spokes we offer but they are less expensive. We also have the Excel spokes if you wanted to stay with the same brand as the Excel rim.
ken
Posted: Mon Mar 04, 2013 3:03 am
by RamboEinar
Ok, so these spokes is the most strong/durable you offer, and will fit both Pro-Wheel and Excel rims (19"-32 spokes) with OEM Honda hub?
http://www.crfsonly.com/catalog/product ... ts_id/4612
Posted: Mon Mar 04, 2013 10:18 pm
by crfsonly
these are the strongest we've used. we don't use pro wheels rims however. there shouldn't be a problem using them with the possible excpecption of having to enlarge the spoke hole (not likely but possible).
Posted: Tue Mar 05, 2013 11:44 am
by RamboEinar
Do i have to enlarge the spoke hole in the OEM Honda hub or the Pro-Wheel rim with bulldog spokes?
Posted: Tue Mar 05, 2013 11:57 am
by crfsonly
possibly. we use the bulldogs for talon/kite hubs and excel or did rims. we don't do much lacing of stock hubs. the pro wheels spokes if memory serves don't require enlarging the stock hub spoke holes. it is pretty common to have to enlarge them and it's not an issue from a strength standpoint.
ken