CRF's Only Forums

Does the slow jet suppose to be hollow from the slotted bottom all the way thru the top where the holes are located?

Also in addition to the slow jet being screwed in, is it also seated thru a rubber gasket at the ribbed end? It unscrewed, but took some force to pull out of opening.

Thx

Ok, I'll answer my own question. Yes, slow jet should be hollow, mine is completely clogged, new one ordered.
No, there should not be a rubber ring/gasket inside where slow jet is located, seems previous owner put 1 here, I removed it.

Welcome to CRF's Only! My apologies that I didn't see your original post. Glad to hear you have it worked out.

Again, welcome.

Ken