Page 1 of 1
Slipping Clutch?
Posted: Sun May 29, 2005 10:25 pm
by 50's_all_the_way
I have a 04' CRF50F and i finnaly installed a 88cc big bore, now the stock clutch slips alittle when im coming out of the corners. Will just a set of HD clutch springs stop it or do i need a HD clutch kit?
Posted: Mon May 30, 2005 1:06 am
by crfsonly
the springs will help...however, depending on how much it's been slipping and for how long you may need the entire kit.
ken
Posted: Mon May 30, 2005 9:30 pm
by 50's_all_the_way
well ive only rode it twice since i put the big bore on. and when you say "kit" do u mean plates and springs, or like the whole clutch assembly that cost around $160?
Thanks.