Page 1 of 1

Please help!!! stroker/big bore kit problem

Posted: Sat Apr 01, 2017 2:13 am
by CRFDaffy
Hello All
I am in serious despair!, I have been waiting 6months to repair my crf450r 2012 after the big end breaking.
I bought second hand left and right crankcases (from a 2012) and a hotrods stroker/cylinder works big bore kit from a eBay seller.
this kit is advertised as bolt on!, after installation the piston locks just before TDC, after inspection I was shocked to see the the piston raises about 1mm above the cylinder ??? WTF!. I have searched the internet and found no other issues of this sort, I checked the boxes and they all say for a 2009-2012, the kit did have 2 base gaskets and 2 head gaskets :-k .
any help would be much appreciated as the seller does not respond and I have no idea what I should do.
thanks in advance, Lee

Re: Please help!!! stroker/big bore kit problem

Posted: Mon Apr 03, 2017 9:01 am
by JimDirt
Since no one else seems to have had this issue , and i am sure you need a answer ASAP , you might want to PM , Ken , , if anyone here would know fitment of those parts , it would be him...

Ken: https://www.crfsonly.com/forum/memberli ... rofile&u=3