CRF's Only Forums

is there any way i can put more seat foam under the seat cover? i am getting the throttle jockey team graphics and seat cover, i would like to make my bike a little taller.

sure you'll be able to do to some degree. i haven't personally but usually there's some extra seat material. you'll need to be very careful to leave enough material to secure the cover to the base. also, make sure you use some type of adhesive to secure the new foam to the original so it doesn't slip off under use.

good luck and post some pictures and let us know how it goes.

what other seat covers would fit on my 150. would a cr125, 85, xr would any of those fit or other models.

thanks

i'm not sure and you wouldn't know unless you tried it or at least held up your seat next to those models and did a visual check.

sorry we couldn't help on this one...ken

what would be the best things to purchase to make my 04 150 get better bottom end and top end. and how would i go about gettin differant color rims , would i have to get them painted myself or is there a website i could buy them from? thanks


#8

if u want more bottom end thwn i would go with a big bore kit. u can also try gearing ur bike different. if u want more bottom end then go with like a 50-52t rear sprocket.

bbr makes gold rims. but i dont really like em. does anyone know were to get black or red rims those would look awsome on my 150

BBR also has red, black, and silver rims besides the gold. They are all anodized.

HOW MANY RPM'S ARE ADDED BY PUTTING THE BBR REV BOX LIMITER ON. HOW MUCH MORE OF A DIFFERANCE WOULD THE TWIN AIR AIR FILTER DO




THANKS, CHRIS LEARD #8

the most important thing the rev box does isn't extending the rpm limit. the most important function is an advance ignition curve. this means it revs quicker, which gets you to the meat of the powerband quicker.

the twinair allows more air to flow into the carb. when you add air you need to add more fuel to maintain the proper air/fuel mixture. adding more air and fuel makes for more power. more power -> more fun!

good luck,

ken

i was really thinking about painting the rims on my crf 150f 05 black
how does this sound to you guys how would i paint them myself

For quality and durability get them powder-coated.

how do u think it would look

If ur still lookin for high seat foam this place sells the high seat foam and seat covers for the 150/230... http://www.gutsracing.com/pages/seatfoampg04.html

I need some tips on how to get the front wheel of my 150 up in second im not really good at this.
in need help
thanx[/b]