Recently acquired a what appears to be bone stock 03 CRF150F3
Had been sitting un-started for more than 14 months.
So.. proceeded to resurrect. Went threw the Carb found the pilot had be upped to 40 but was completely clogged. Replaced.
Cleaned the tank & petcock of the gelatinous goo that was once gas.
New Air Filter, spark plug & oil. Adjusted the valves.
Check it had spark ..new fuel, key on gave it some choke a few kicks no cough no pop nothing.
Air ..check.
Fuel ...yup
Spark ...visible
So some help please. Electrical ? pretty simple but how do I test for function. CDI box ? I can do a compression check what should I expect?
Are there baseline carb settings IE needle float jets screws/turns?
Thx