Page 1 of 1
new here ,im looking for a used carb
Posted: Wed Aug 20, 2008 9:31 am
by SEANY
hi,im new here and it looks like a great site! i hate to make my first post a request but i just bought a used 03 crf150f for my son and i need a used carb for it. the float is hammered and it just keeps leaking gas a local shop(harley shop not dirtbike) had it off about 10 times and cant get it to stop,he said i should look for a replacement. thanks for any help!
Posted: Wed Aug 20, 2008 9:45 am
by Asmith
Welcome to the site!
A new float or float needle would be a whole lot cheaper than a carb.
Probably just the needle not seating.
FLOAT Needle 16011-KCK-910 $19.98
FLOAT 16013-KN4-A10 $18.11
Posted: Wed Aug 20, 2008 10:37 am
by SEANY
you wouldnt happen to know the p/n specs on the stock carb. there is an aftermarket one on ebay but im not sure if it will work thanks
Posted: Wed Aug 20, 2008 10:46 am
by Asmith
I believe it's a 24mm Keihin PWK.
There are knock off's of this carb, but I can't vouch for their quality. I know that the Keihin's are the best.
http://scootrs.com/moreinfo.cfm?Product_ID=442
Posted: Sat Aug 23, 2008 6:25 pm
by RedneckRider181
Very close...
It's a Keihin PD,
And I'm pretty sure it's a 24mm.
A float pin might be needed too from the sound of things. But if everything else is okay, it would be better to just fix the old one.
Unless you find a killer deal on ebay for a carb even better than the stock one, then you risk getting a piece of $H!+.