Page 1 of 1

Bars

Posted: Thu Jun 07, 2007 7:31 pm
by RedRider713
As some of you know, I just bought myself a 150F. I just put new grips on and now I rotated the bars. I havent got a lot of know-how on the F-Series. So I loosend the clamps and rotated the bars about 10 degrees forward, and now I'm finding it hard to use the clutch and front brake. I was wondering if there is a way to loosen the perches and just move the clutch and brake perches instead of everything.

Any help?

Posted: Thu Jun 07, 2007 7:49 pm
by djh65
there should be 2 8mm bolts holding the clutch and brake levers in place. Loosen rotate tighten.
David

Posted: Thu Jun 07, 2007 7:58 pm
by RedRider713
Ok thanks