racetech gold valve emulators
  • rhiocrf230
    Posts:21
    Joined:Thu Apr 12, 2012 1:08 pm
    racetech gold valve emulators

    by rhiocrf230 » Tue Jun 12, 2012 1:35 pm

    Has anyone installed these in the 230 f forks. This will be my next upgrade but am uncertian how they go in. I have looked around and have only been able to find information on how great they are but no info on how to install them. I have access to the service manual but have know Idea where they go in the front fork.

    Help would be appreciated as I am trying to avoid the dealers rates to install...
  • Aussiecrf230
    Posts:1964
    Joined:Fri Jan 06, 2006 11:11 pm

    by Aussiecrf230 » Wed Jun 13, 2012 1:08 am

    This doesn't look to bad.

    http://www.hondacrf230l.com/index.php?topic=165.0

    Try with standard springs first as emulator will compress spring 19mm.
    Ray
    Australia

    CRF230F 2004
    C30F Power Up needle
    Mains 132
    Idle 45
    2 turns out
    Baffle out, Screens In

    It starts,it runs,it gets to where all CRFs can get to without the valve or valve plate dramas

Who is online

Users browsing this forum: No registered users and 1 guest