CRF's Only Forums

Posted: **Wed Jul 29, 2009 8:29 am**

So I just rejetted my bike and ran into the tamper proof fuel screw. After pissing around with it for awhile, the whole cover broke off. Pictures below. I just ordered a new fuel screw, but how to I adjust it since the threads are in the case? Thanks.

Posted: **Wed Jul 29, 2009 9:27 pm**

You are hosed. There is a tool for the D shaped fuel screw or you use a spade connector (18-22AWG). Just push it on and unscrew. Other people have used a 22-18 AWG (red) splice heated with a heat gun.

You need a new housing. Here's an entire carb on ebay:

http://cgi.ebay.com/ebaymotors/2006-Honda-CRF230-CRF-230--carb-carberater-carburetor_W0QQitemZ260453691778QQcmdZViewItemQQimsxZ20090727?IMSfp=TL0907271710003r31661

New carb runs $180

Posted: **Thu Jul 30, 2009 2:18 pm**

What about this? Why is it so cheap? It says it works with a 230.

http://cgi.ebay.com/ebaymotors/30MM-MIK ... dZViewItem

Posted: **Thu Jul 30, 2009 4:13 pm**

You would have to mess with throttle linkage etc. No clue why it is so cheap. Your carb is a Keihin not a Mikuni.

CRF's Only Forums

Fuel screw cover broken off

Fuel screw cover broken off