by Aussiecrf230 » Tue Jan 30, 2018 1:15 am
My bike has one of these.
https://bboffroad.com.au/catalogsearch/result/?q=Crf230
Australian company so it might not help but at least you know what I am talking about. Probaly similar to the Flatlands unit. Great at crushing rocks rather than tearing up your frames or knocking a hole in the case.
The wings up the sides are good when your wheel is in a deep rut too.
Oil changes are less fun but it isn't that hard to pull it off or make you own drain funnel.
I used a longer countersunk screws to make fitting easy with some rubber mat to cut down the noise.
Ray
Australia
CRF230F 2004
C30F Power Up needle
Mains 132
Idle 45
2 turns out
Baffle out, Screens In
It starts,it runs,it gets to where all CRFs can get to without the valve or valve plate dramas