If you jump with a CRF230F
  • pioneer9412
    Posts:5
    Joined:Sun Jun 17, 2007 7:38 pm
    If you jump with a CRF230F

    by pioneer9412 » Sun Jun 17, 2007 8:42 pm

    If you jump on a 2006CRF230F you need to get the BBR springs don't you. and if you jump do you stand up when you hit it
  • the hawk
    Posts:75
    Joined:Tue Oct 03, 2006 6:54 pm

    by the hawk » Sun Jun 17, 2007 8:58 pm

    You Don't Need the bbr springs to jump... me and my friends have jumped 60 ft table tops with out the springs but with the springs one of my friends was able to hit a 90 ft. step up clean... and yeah on the its not too easy to seat jump some of the bigger jumps, but small ones its good
    '06 CRF230F- BBR Exhaust, Uni Free-Flow Air Filter, BBR Front fork Springs, BBR Rev Box, 122 Main Jet, MSR Handlebars, ASV Clutch Lever
  • the hawk
    Posts:75
    Joined:Tue Oct 03, 2006 6:54 pm

    by the hawk » Sun Jun 17, 2007 9:04 pm

    P.s. my seals are also blown so the springs are awesome at this point
    '06 CRF230F- BBR Exhaust, Uni Free-Flow Air Filter, BBR Front fork Springs, BBR Rev Box, 122 Main Jet, MSR Handlebars, ASV Clutch Lever
  • Lets Ride
    Posts:23
    Joined:Thu May 31, 2007 2:57 pm

    by Lets Ride » Mon Jun 18, 2007 12:03 pm

    On the small stuff it's fine.

    Just don't go all crazy and jump 40+ with the stock suspension :lol:
    06 CRF250X

    Re-Jetted, Airbox Mods, Flatland Racing Radiator Guards, Works Connection Skid Plate

Who is online

Users browsing this forum: No registered users and 1 guest