Mounting a X headlight on a 230
  • wt018
    Posts:10
    Joined:Sat Aug 27, 2005 2:57 am
    Mounting a X headlight on a 230

    by wt018 » Mon Nov 27, 2006 6:33 am

    Looking to see if anyone has mounted a x headlight on their 230 I saw it before but cant find the post would love to know how it mounts up and how it was wired any help would be great
    05 crf450x twin air intake system,jd jet kit, 170 main, zip ty fuel screw, boyessen apc, fmf header and q2 muffler, rekluse cover, applied triple and pro-tapers,smog block off,unibikers
  • User avatar
    XGiant
    Posts:449
    Joined:Sat Apr 15, 2006 6:59 am

    by XGiant » Mon Nov 27, 2006 6:39 am

    Image
  • User avatar
    nminus1
    Posts:3613
    Joined:Mon May 01, 2006 11:16 am

    by nminus1 » Tue Nov 28, 2006 3:15 pm

    I will be mounting an X headlight on my wife's 230 shortly, and will do a pic -how to do. I ordered a BD switch that is a kill/off/low/hi beam model that looks like good quality. I am going to wire the power right from the battery with fused protection, as we are smart enough not to leave the headlight on. It looks like I will have to drill the upper triples for a place to mount the headlight, and probably use a short bracket each side. Check back in a week or two for the post, I think its gonna look bitchin on her black 230.
  • User avatar
    palmrider230
    Posts:538
    Joined:Tue Oct 31, 2006 8:47 pm

    by palmrider230 » Tue Nov 28, 2006 3:41 pm

    Will the plastic on the light be black too?
  • User avatar
    nminus1
    Posts:3613
    Joined:Mon May 01, 2006 11:16 am

    by nminus1 » Tue Nov 28, 2006 3:58 pm

    Nope. Stock X headlight, but I think my wife will want a number this time too. I'll try to get r done this weekend, I only have about 20 chores before that one but we are going out 12/16 to the dez so it will be done before then.
  • User avatar
    Cantstunt
    Posts:38
    Joined:Mon Apr 10, 2006 7:08 pm

    .

    by Cantstunt » Tue Nov 28, 2006 5:37 pm

    I mounted an X headlight on my 230 but I didn't relocate my "black box" and the headlight stuck out too far and looked stupid. I was waiting for someone else to do it and post up how they did it.
  • User avatar
    palmrider230
    Posts:538
    Joined:Tue Oct 31, 2006 8:47 pm

    by palmrider230 » Tue Nov 28, 2006 5:59 pm

    20 thats all!!!You've got like a day off LOL!!!
  • User avatar
    nminus1
    Posts:3613
    Joined:Mon May 01, 2006 11:16 am

    by nminus1 » Tue Nov 28, 2006 7:29 pm

    Maybe a little, but with that sweet 250X the pain should have worn off long ago. ., you should be shootin rocks at AS by next ride, I know you scored!
  • wt018
    Posts:10
    Joined:Sat Aug 27, 2005 2:57 am

    by wt018 » Wed Nov 29, 2006 7:23 am

    I apprectiate the help how much did you get the light for anyways
    05 crf450x twin air intake system,jd jet kit, 170 main, zip ty fuel screw, boyessen apc, fmf header and q2 muffler, rekluse cover, applied triple and pro-tapers,smog block off,unibikers
  • User avatar
    nminus1
    Posts:3613
    Joined:Mon May 01, 2006 11:16 am

    by nminus1 » Wed Nov 29, 2006 9:18 am

    $75.00 I didn't haggle its in near perfect condition and from a fellow CRF's member. The BD switch is $25=$100 mod, but I think it will look slicker than an aftermarket which would be as much work to install and not look as good IMO.
  • User avatar
    Old-Man
    Posts:2718
    Joined:Fri Nov 03, 2006 9:38 pm

    Re: .

    by Old-Man » Sat Dec 09, 2006 9:25 am

    Cantstunt wrote:I mounted an X headlight on my 230 but I didn't relocate my "black box" and the headlight stuck out too far and looked stupid. I was waiting for someone else to do it and post up how they did it.


    You need to move the rev box under the gas tank. If you don't it doesn't fit right. It should look like it came stock on the bike. I put one on my wifes 230 and it looks like it was made for the bike.
    Old-Man

    Image
  • User avatar
    Cantstunt
    Posts:38
    Joined:Mon Apr 10, 2006 7:08 pm

    Re: .

    by Cantstunt » Sat Dec 09, 2006 10:39 am

    Old-Man wrote:
    Cantstunt wrote:I mounted an X headlight on my 230 but I didn't relocate my "black box" and the headlight stuck out too far and looked stupid. I was waiting for someone else to do it and post up how they did it.


    You need to move the rev box under the gas tank. If you don't it doesn't fit right. It should look like it came stock on the bike. I put one on my wifes 230 and it looks like it was made for the bike.


    Thanks for the tip!
  • User avatar
    nminus1
    Posts:3613
    Joined:Mon May 01, 2006 11:16 am

    by nminus1 » Fri Dec 15, 2006 3:58 pm

    Got a pic OM? I just fabricated the bottom bracket, the paint is drying on it now, the wiring and top brackets come tomorrow, when I have to figure out the rev box thing. I realized with the Reger clamps and CR 85 forks my mods will not work on a stock bike, but I will post pics to give people some ideas.
  • User avatar
    Old-Man
    Posts:2718
    Joined:Fri Nov 03, 2006 9:38 pm

    by Old-Man » Fri Dec 15, 2006 4:47 pm

    What picture are you looking for? The rev box under the seat?
    Old-Man

    Image
  • User avatar
    nminus1
    Posts:3613
    Joined:Mon May 01, 2006 11:16 am

    by nminus1 » Fri Dec 15, 2006 6:29 pm

    I thought you said tank....you put it under the tank..right?

Who is online

Users browsing this forum: No registered users and 1 guest