Displaying 1 to 20 (of 37 products)
* Kits include two Teflon spherical bearings (cup bearings when used), four seals and related components.
* All shock kits rebuild…
- Manufacturer
- Pivot Works
- Model
- PWSHKH17021
Replace those worn out shock link bearings and seals. One kits has all you need to get the job done…
- Manufacturer
- Pivot Works
- Model
- PWLKH64000
Kouba lowering link (CRF2) will lower the rear .85" on the 04-05 and .625" on the '06 CRF250R/X - assuming…
- Manufacturer
- Kouba
- Model
- kl-crf2
Kouba lowering link (CRF3) will lower the rear 1.6" on the 04-05 and 1.5" on the 06+ CRF250X - assuming…
- Manufacturer
- Kouba
- Model
- kl-crf3
* Pivot Works Front Fork Kits are the ultimate item for the do-it-yourself guy at home in the garage or…
- Manufacturer
- Pivot Works
- Model
- PWFFKH040202
Replace those worn-out and high-priced stock Honda CRF swingarm bearings with the Pivot Works Swing Arm Bearing Kit. Completely restores…
- Manufacturer
- Pivot Works
- Model
- PWSAKH31020
The advantages of the Xtrig Preload Adjuster
Mechanical transmissionUse the complete thread of the shock absorberEasy handlingAdjust the preload very…
- Manufacturer
- Xtrig
- Model
- 770730
Replace those worn out shock link bearings and seals. One kits has all you need to get the job done…
- Manufacturer
- Pivot Works
- Model
- PWLKH63000
The only complete shock rebuild kit on the market
Includes bladder, new complete seal-head, piston ring, piston o-ring, bumper, and new…
- Manufacturer
- Pivot Works
- Model
- PWSHRH02000
* Kits include two Teflon spherical bearings (cup bearings when used), four seals and related components. * All shock kits…
- Manufacturer
- Pivot Works
- Model
- PWSHKH26021
Replace those worn out shock link bearings and seals. One kits has all you need to get the job done…
- Manufacturer
- Pivot Works
- Model
- PWLKH66000
* Set of 2 Seal Skins
* Made from 2mm neoprene
* Seal Skins fit around the…
- Manufacturer
- Dirt Skins
- Model
- 040600
Protect expensive suspension components from rocks, mud, sand and all other types of roostMade of flexible 2mm neoprene and held…
- Manufacturer
- Dirt Skins
- Model
- 0406-0003
Cold-wound on precision CNC equipment for the ulimate in strength
Heat-tempered, shot-peened and end-ground for durability
Preset for fatigue resistance
Wide variety of…
- Manufacturer
- Factory Connection
- Model
- FC-F-SPR
This spring/mod absorbs high shaft speeds with a more positive feel, reduces…
- Manufacturer
- Factory Connection
- Model
- HSCOMPSPRING
Light weight, no moving parts to jam, nothing to install on the fork protector. One or more slots are cut…
- Manufacturer
- RE
- Model
- MX-HD478-CA
Honda original oil and dust seals. Includes both seals for each forkOriginal seals for long life and…
- Manufacturer
- Honda
- Model
- HOEM-SK
For use on most Kayaba and Showa inverted forks with a M5x0.8 air bleed screw in the fork cap
New…
- Manufacturer
- Motion Pro
- Model
- 11-0089
Two sizes to fit almost every bikeStabilizes bike during transportationKeeps bike strapped down tight without damaging fork sealsBikes won't bounce…
- Manufacturer
- PC Racing
- Model
- PCFS
Displaying 1 to 20 (of 37 products)
