Displaying 1 to 20 (of 39 products)
Race Tech rear shock spring. Make sure to select the correct spring rate for your riding weight, type of riding…
- Manufacturer
- Race Tech
- Model
- SRSP 5524
* Kits include two Teflon spherical bearings (cup bearings when used), four seals and related components.
* All shock kits rebuild…
- Manufacturer
- Pivot Works
- Model
- PWSHKH17021
- A High Performance Spring has a high stiffness to mass ratio. In other words, it is light weight for…
- Manufacturer
- Race Tech
- Model
- 11-33(0-5)
Sold in pairs for left and right fork guards
*** No Longer Available - Do Not Order ***…
- Manufacturer
- CRF's Only
- Model
- CO-FRKG-450X
Kouba lowering link (CRF3) will lower the rear 3/4" assuming the race sag is still set at approx. 100 mm's/3.9".…
- Manufacturer
- Kouba
- Model
- kl-crf3
Kouba lowering link (CRF4) will lower the rear 1.75" assuming the race sag is still set at approx. 100 mm's/3.9".…
- Manufacturer
- Kouba
- Model
- kl-crf4
* Pivot Works Front Fork Kits are the ultimate item for the do-it-yourself guy at home in the garage or…
- Manufacturer
- Pivot Works
- Model
- PWFFKH040202
Kit contains two Teflon spherical bearings (cup bearings when used), four seals and related componentsEach shock kit rebuilds both ends…
- Manufacturer
- Pivot Works
- Model
- PWSHKH26021
Replace those worn out shock link bearings and seals. One kits has all you need to get the job done…
- Manufacturer
- Pivot Works
- Model
- PWLKH63000
The only complete shock rebuild kit on the market
Includes bladder, new complete seal-head, piston ring, piston o-ring, bumper, and new…
- Manufacturer
- Pivot Works
- Model
- PWSHRH02000
Replace those worn-out and high-priced stock Honda CRF swingarm bearings with the Pivot Works Swing Arm Bearing Kit. Completely restores…
- Manufacturer
- Pivot Works
- Model
- PWSAK-H32-50
Newly designed Shock Gold Valve Kit
Provides better control for the rider. This piston design creates more shim leverage and decreases the…
- Manufacturer
- Race Tech
- Model
- SMGV 5003
The advantages of the Xtrig Preload Adjuster
Mechanical transmissionUse the complete thread of the shock absorberEasy handlingAdjust the preload very…
- Manufacturer
- Xtrig
- Model
- 770730
* Set of 2 Seal Skins
* Made from 2mm neoprene
* Seal Skins fit around the…
- Manufacturer
- Dirt Skins
- Model
- 040600
Protect expensive suspension components from rocks, mud, sand and all other types of roostMade of flexible 2mm neoprene and held…
- Manufacturer
- Dirt Skins
- Model
- 0406-0003
Cold-wound on precision CNC equipment for the ulimate in strength
Heat-tempered, shot-peened and end-ground for durability
Preset for fatigue resistance
Wide variety of…
- Manufacturer
- Factory Connection
- Model
- FC-F-SPR
This spring/mod absorbs high shaft speeds with a more positive feel, reduces…
- Manufacturer
- Factory Connection
- Model
- HSCOMPSPRING
Light weight, no moving parts to jam, nothing to install on the fork protector. One or more slots are cut…
- Manufacturer
- RE
- Model
- MX-HD478-CA
Honda original oil and dust seals. Includes both seals for each forkOriginal seals for long life and…
- Manufacturer
- Honda
- Model
- HOEM-SK
Displaying 1 to 20 (of 39 products)
