Displaying 1 to 20 (of 42 products)
Carbon fiber with abrasion-resistant epoxy
Snap over forks without mounting hardware
…
- Manufacturer
- Moose Racing
- Model
- 0412-0163
Replace those worn-out and high-priced stock Honda CRF swingarm bearings with the Pivot Works Swing Arm Bearing Kit. Completely restores…
- Manufacturer
- Pivot Works
- Model
- PWSAK-H31-020
* Kits include two Teflon spherical bearings (cup bearings when used), four seals and related components.
* All shock kits rebuild…
- Manufacturer
- Pivot Works
- Model
- PWSHK-H17-021
Kouba lowering link (CRF2) will lower the rear .85" on the 04-05 and .625" on the '06 CRF250R/X - assuming…
- Manufacturer
- Kouba
- Model
- kl-crf2
Kouba lowering link (CRF3) will lower the rear 1.6" on the 04-05 and 1.5" on the 06+ CRF250X - assuming…
- Manufacturer
- Kouba
- Model
- kl-crf3
* Pivot Works Front Fork Kits are the ultimate item for the do-it-yourself guy at home in the garage or…
- Manufacturer
- Pivot Works
- Model
- PWFFK-H04-020
Replace those worn-out and high-priced stock Honda CRF swingarm bearings with the Pivot Works Swing Arm Bearing Kit. Completely restores…
- Manufacturer
- Pivot Works
- Model
- PWSAK-H31-020
The advantages of the Xtrig Preload Adjuster
Mechanical transmission
Use the complete thread of the shock absorber
Easy handling
Adjust the preload very quickly
Low…
- Manufacturer
- Xtrig
- Model
- 500010100201
Replace those worn out shock link bearings and seals. One kits has all you need to get the job done…
- Manufacturer
- Pivot Works
- Model
- PWLK-H63-000
The only complete shock rebuild kit on the market
Includes bladder, new complete seal-head, piston ring, piston o-ring, bumper, and new…
- Manufacturer
- Pivot Works
- Model
- PWSHR-H02-000
* Kits include two Teflon spherical bearings (cup bearings when used), four seals and related components.
* All shock kits rebuild…
- Manufacturer
- Pivot Works
- Model
- PWSHK-H26-021
Replace those worn out shock link bearings and seals. One kits has all you need to get the job done…
- Manufacturer
- Pivot Works
- Model
- PWLK-H66-000
* Set of 2 Seal Skins
* Made from 2mm neoprene
* Seal Skins fit around the fork seals with a velcro…
- Manufacturer
- Dirt Skins
- Model
- 040600
Protect expensive suspension components from rocks, mud, sand and all other types of roost
Made of flexible 2mm neoprene and held…
- Manufacturer
- Dirt Skins
- Model
- 0406-0003
Updated fork seal kit uses a thicker fork seal and thinner back washer with more pliable…
- Manufacturer
- Factory Connection
- Model
- SEALKIT47SUU
Cold-wound on precision CNC equipment for the ulimate in strength
Heat-tempered, shot-peened and end-ground for durability
Preset for fatigue resistance
Wide variety of…
- Manufacturer
- Factory Connection
- Model
- FC-F-SPR
This spring/mod absorbs high shaft speeds with a more positive feel, reduces…
- Manufacturer
- Factory Connection
- Model
- HSCOMPSPRING
Cold-Wound on precision CNC equipment for the ultimate in strength
Heat-tempered, shot-peened and end-ground for durability
Pre-set for fatigue resistance
Wide variety of…
- Manufacturer
- Factory Connection
- Model
- FC-STD-SHK
125cc and Larger Bikes
Help protect vulnerable fork tubes and seals from dust,…
- Manufacturer
- Moose Racing
- Model
- 0406-0012
Displaying 1 to 20 (of 42 products)