Displaying 1 to 20 (of 50 products)
Carbon fiber with abrasion-resistant epoxy
Snap over forks without mounting hardware
…
- Manufacturer
- Moose Racing
- Model
- 0412-0163
Cold-wound on precision CNC equipment for the ultimate in strength
Heat-tempered, shot-peened and end-ground for durability
Preset for fatigue resistance
Wide variety of…
- Manufacturer
- Factory Connection
- Model
- FC-F-SPR
Race Tech rear shock spring. Make sure to select the correct spring rate for your riding weight, type of riding…
- Manufacturer
- Race Tech
- Model
- SRSP 5524
Kouba lowering link (CRF3) will lower the rear 1.75" on the 04-up CRF250R/X - assuming the race sag is still…
- Manufacturer
- Kouba
- Model
- kl-crf3
* Pivot Works Front Fork Kits are the ultimate item for the do-it-yourself guy at home in the garage or…
- Manufacturer
- Pivot Works
- Model
- PWFFK-H04-020
The advantages of the Xtrig Preload Adjuster
Mechanical transmission
Use the complete thread of the shock absorber
Easy handling
Adjust the preload very quickly
Low…
- Manufacturer
- Xtrig
- Model
- 500010100201
Replace those worn out shock link bearings and seals. One kits has all you need to get the job done…
- Manufacturer
- Pivot Works
- Model
- PWLK-H63-000
- A High Performance Spring has a high stiffness to mass ratio. In other words, it is light weight for…
- Manufacturer
- Race Tech
- Model
- 11-74(1,5,7,
- A High Performance Spring has a high stiffness to mass ratio. In other words, it is light weight for…
- Manufacturer
- Race Tech
- Model
- 11-33(0-5)
Kouba lowering link (CRF3) will lower the rear 3/4" assuming the race sag is still set at approx. 100 mm's/3.9".…
- Manufacturer
- Kouba
- Model
- kl-crf3
Kouba lowering link (CRF4) will lower the rear 1.75" assuming the race sag is still set at approx. 100 mm's/3.9".…
- Manufacturer
- Kouba
- Model
- kl-crf4
* Pivot Works Front Fork Kits are the ultimate item for the do-it-yourself guy at home in the garage or…
- Manufacturer
- Pivot Works
- Model
- PWFFK-H04-020
Kit contains two Teflon spherical bearings (cup bearings when used), four seals and related components
Each shock kit rebuilds both ends…
- Manufacturer
- Pivot Works
- Model
- PWSHK-H26-021
* Kits include two Teflon spherical bearings (cup bearings when used), four seals and related components.
* All shock kits rebuild…
- Manufacturer
- Pivot Works
- Model
- PWSHK-H17-021
Replace those worn out shock link bearings and seals. One kits has all you need to get the job done…
- Manufacturer
- Pivot Works
- Model
- PWLK-H63-000
The only complete shock rebuild kit on the market
Includes bladder, new complete seal-head, piston ring, piston o-ring, bumper, and new…
- Manufacturer
- Pivot Works
- Model
- PWSHR-H02-000
Replace those worn-out and high-priced stock Honda CRF swingarm bearings with the Pivot Works Swing Arm Bearing Kit. Completely restores…
- Manufacturer
- Pivot Works
- Model
- PWSAK-H32-500
- A High Performance Spring has a high stiffness to mass ratio. In other words, it is light weight for…
- Manufacturer
- Race Tech
- Model
- 11-74(1,5,7,
Newly designed Shock Gold Valve Kit
Provides better control for the rider. This piston design creates more shim leverage and decreases the…
- Manufacturer
- Race Tech
- Model
- SMGV 5003
The advantages of the Xtrig Preload Adjuster
Mechanical transmission
Use the complete thread of the shock absorber
Easy handling
Adjust the preload very quickly
Low…
- Manufacturer
- Xtrig
- Model
- 500010100201
Displaying 1 to 20 (of 50 products)