You can move the shift lever up or down on the spline to make it work better with the boot. I had to move mine on the 230 once I bought proper boot.
This may help but don't know if it is longer or just a stronger replacement on Cfr110 controls page.
https://www.crfsonly.com/catalog/index. ... 60_291_309
Last edited by Aussiecrf230
on Mon Sep 09, 2019 7:38 pm, edited 2 times in total.
C30F Power Up needle
2 turns out
Baffle out, Screens In
It starts,it runs,it gets to where all CRFs can get to without the valve or valve plate dramas